|Name||Other Name||Brand Name|
Drum press machine
Leading quality, unique design, good handling, cost-effective.
Can be customized according to customer's requirements.
Master cylinder pressure:25MPa
Max. working pressure of master cylinder:20MPa
Can meke Φ5200×30mm dished end.
With this pressing machine,the spinned dished end have smooth
surface,small round mark, good roundness, high productivity.
Other model can be customized according to customer's demands
Extensive applications of dished end:
Dished end is a major part which on the end cap of pressure
vessels,such us storage tanks, heat exchangers, towers, reaction
kettles, boilers and separation equipment. So our machine is quite
wildly uesd in these fields.
|1||Master cylinder weight||500MT|
|2||Master cylinder pressure||25MPa|
|3||Max. working pressure of master cylinder||20MPa|
|4||Distance between upright posts||6200mm|
|5||Master electric motor power||75KW|
1,The piston rod and barrel of the drum press machine master
cylinder adopt chilled nodular iron, 35# forgings and 16Mn hot
rolling steel plates respectively. Strokes can guarantee production
of Φ5200 ellipsoidal dish ends
2,The main body section stiffness of the drum press machine should
be sufficient, warranty for 10 years. When the upper mold pressure
reaches 20Mpa, the beam center deflection degree can’t exceed 2.5mm
(deformation f=Δ/L=1/2500) and the operating machine load can’t be
less than 10T.
3,The seller provides 6 sets of drum press toolings, those are,
R700, R900, R1200, R1500, R1900, R2500, whose material is high
quality nodular cast iron with steel stamp.
4,Functions of automatic and manual operations are equipped.
Pressure is shown on the gauge and can be adjusted.
Dished end making process and other suggested machines:
1.CNC Gantry Flame and Plasma Cutting Machine
We use this machine to cut the plate. If small dish end, we can cut
a whole circle directly, if big dish end, in order to save
material, we usually cut two pieces, then weld them into whole
After welding, we use this small trolley to grind the welding joint
and get flat material.
3.YGJ Φ 5200×30mm Pressing Machine with pressing toolings
Then, we can load our flat material into pressing machine. This
machine’s piston rod of the master cylinder moves up and down to
drive the upper tool to press the raw plate to become the required
4.FBJ Φ5200×30mm Flanging machine with toolings
After that, we load this concave shape plate into next machine:
dish end flanging or edging machine. The clamping frame functions
as the fix and free rotation of dish ends. Pressure wheels make
movements based on certain round arc and put force on the dish end
blank to make it rotate constantly to form dish ends and make
thickness reduction minimum to achieve the ideal state.
It is used to cut dished end uneven edge.
6.Got dished end finally.
Factory name: Wuxi Dongyang Spinning Equipment Co.,Ltd