|Name||Other Name||Brand Name|
Leading quality, unique design, good handling, cost-effective.
Can be customized according to customer's requirements.
Can make Φ3000×16mm dished end.
With this pressing machine,the spinned dished end have smooth
surface,small round mark, good roundness, high productivity
Other model can be customized according to customer's demands
Extensive applications of dished end:
Dished end is a major part which on the end cap of pressure
vessels,such us storage tanks, heat exchangers, towers, reaction
kettles, boilers and separation equipment. So our machine is quite
wildly uesd in these fields.
Max. plate thickness
Min. plate thickness S
Stainless steel 2mm
Max. plate radius
Min. plate radius
Max diameter of ellipsoidal dish end
Min diameter of ellipsoidal dish end
Forming wheel axle diameter
D=160 material 42GrMo
Forming wheel rotation power
N=32KW/26KW double speed
1,The pressure of oblique cylinder, front cylinder, clamping must
show on pressure gauge and could be adjustable. The speed of front
and rear cylinders could be adjustable. Hydraulic station pressure
could show on gauge and adjustable
2,A pressure wheel (mounted on the axle), and quenching treatment
HRC46 ~ 50.
3,11 forming wheels, R30, R50, R80, R100, R150, R200, R250, R300,
R350, R400, R450. Material QT600-3, marked with stamp. Forming
wheel must have good abrasion resistance, dish end must have good
gloss after spinning.
4,Make sure clamping cylinder work normally
5,Nut (for screw) strength: abrasion resistance must ZHA166-6-3-2
(aluminum brass), that is 9-4 copper.
6,Plate width of main bed frame S=25mm, head plate processed with
45mm plate material
Inner height 2160mm Total height 3360mm
Dished end making process and other suggested machines:
1.CNC Gantry Flame and Plasma Cutting Machine
We use this machine to cut the plate. If small dish end, we can cut
a whole circle directly, if big dish end, in order to save
material, we usually cut two pieces, then weld them into whole
After welding, we use this small trolley to grind the welding joint
and get flat material.
3.YGJ Φ 3000×16mm Pressing machine
Flat material is loaded into pressing machine. This machine’s
piston rod of the master cylinder moves up and down to drive the
upper tool to press the raw plate to become the required concave
4.FBJ Φ3000×16mm Flanging Machine with toolings
we load this concave shape plate into next machine: dish end
flanging or edging machine. The clamping frame functions as the fix
and free rotation of dish ends. Pressure wheels make movements
based on certain round arc and put force on the dish end blank to
make it rotate constantly to form dish ends and make thickness
reduction minimum to achieve the ideal state.
Cut dished end uneven edge.
6.The finished dished end.
Factory name: Wuxi Dongyang Spinning Equipment Co.,Ltd