|Name||Other Name||Brand Name|
Leading quality, unique design, good handling, cost-effective.
Can be customized according to customer's requirements.
Can make Φ5200×30mm dished end.
With this pressing machine,the spinned dished end have smooth
surface,small round mark, good roundness, high productivity
Other model can be customized according to customer's demands
Extensive applications of dished end:
Dished end is a major part which on the end cap of pressure
vessels,such us storage tanks, heat exchangers, towers, reaction
kettles, boilers and separation equipment. So our machine is quite
wildly uesd in these fields.
Max. processing plate thickness S
Min. processing plate thickness S
Stainless steel 3mm
Max. plate radius
Min. plate radius
Max. diameter of ellipsoidal dish end
Min. diameter of ellipsoidal dish end
Forming wheel axle diameter
Forming wheel rotation power
N=67KW/55KW double speed
1, Pressures of oblique cylinder and clamping must be shown on
pressure gauges and can be adjusted. The vertical cylinder speed
also can be adjusted. There should be pressure gauges at hydraulic
station and pressures can be adjusted as well.
2, Quenching treatment is made for one pressure wheel (mounted on
3, 15 forming wheels, those are, R30, R50, R100, R150, R200, R250,
R300, R350, R400, R450, R500, R550, R610, R680, R750, whose
material is high quality nodular cast iron with steel stamp, are
also treated by quenching, bringing strong abrasion resistance and
good gloss of dish ends after spinning.
4, Make sure clamping oil cylinder works normally.
5, Nut (for the screw rod) strength:Abrasion resistance should be
in conformity with ZHA166-6-3-2 (aluminum brass), that is, 9-4
6, Main body section: inner height about 2900mm, total height about
Dished end making process and other suggested machines:
1. CNC Gantry Flame and Plasma Cutting Machine
We use this machine to cut the plate. If small dish end, we can cut
a whole circle directly, if big dish end, in order to save
material, we usually cut two pieces, then weld them into whole
After welding, we use this small trolley to grind the welding joint
and get flat material.
3.YGJ Φ 5200×30mm Pressing machine
Flat material is loaded into pressing machine. This machine’s
piston rod of the master cylinder moves up and down to drive the
upper tool to press the raw plate to become the required concave
4. FBJ Φ5200×30mm Flanging Machine with toolings
we load this concave shape plate into next machine: dish end
flanging or edging machine. The clamping frame functions as the fix
and free rotation of dish ends. Pressure wheels make movements
based on certain round arc and put force on the dish end blank to
make it rotate constantly to form dish ends and make thickness
reduction minimum to achieve the ideal state.
5. Edge trimmer
With flanging machine and pressing machine ,they composed to be a
spinning machine unit. It is used to
cut dished end uneven edge.
6. Final product.
Factory name: Wuxi Dongyang Spinning Equipment Co.,Ltd