|Name||Other Name||Brand Name|
Leading quality, unique design, good handling, cost-effective.
Can be customized according to customer's requirements.
Can make Φ10000×50mm dished end.
With this pressing machine,the spinned dished end have smooth
surface,small round mark, good roundness, high productivity
Other model can be customized according to customer's demands
Extensive applications of dished end:
Dished end is a major part which on the end cap of pressure
vessels,such us storage tanks, heat exchangers, towers, reaction
kettles, boilers and separation equipment. So our machine is quite
wildly uesd in these fields.
|1||Max. plate thickness S||Q235 50mm|
Min. plate thickness S
Stainless steel 5mm
Max. plate radius
Min. plate radius
Max diameter of ellipsoidal dish end
Min diameter of ellipsoidal dish end
Max diameter of dished end
Min diameter of dished end
Forming wheel axle diameter
Forming wheel rotation power
1,The pressure of oblique cylinder, front cylinder, clamping must
show on pressure gauge and could be adjustable. The speed of front
and rear cylinders could be adjustable. Hydraulic station pressure
could show on gauge and adjustable
2, A pressure wheel R200(mounted on the axle), and quenching
3,16 forming wheels,
Material QT600-3, marked with stamp. Forming wheel must have good
abrasion resistance; dish end must have good gloss after spinning.
4, Make sure clamping cylinder work normally
5, Nut (for screw) strength: abrasion resistance must ZHA166-6-3-2
(aluminum brass), that is 9-4 copper.
6, Inner height 4286mm Main Machine height 4286mm
Machine total height about 6786mm, internal width about 10500mm
Dished end making process and other suggested machines:
1. CNC Gantry Flame and Plasma Cutting Machine
We use this machine to cut the plate. If small dish end, we can cut
a whole circle directly, if big dish end, in order to save
material, we usually cut two pieces, then weld them into whole
After welding, we use this small trolley to grind the welding joint
and get flat material.
3. YGJ Φ 10000×50mm Pressing machine
Flat material is loaded into pressing machine. This machine’s
piston rod of the master cylinder moves up and down to drive the
upper tool to press the raw plate to become the required concave
4. FBJ Φ 10000×50mm Flanging Machine with toolings
We load this concave shape plate into next machine: dish end
flanging or edging machine. The clamping frame functions as the fix
and free rotation of dish ends. Pressure wheels make movements
based on certain round arc and put force on the dish end blank to
make it rotate constantly to form dish ends and make thickness
reduction minimum to achieve the ideal state.
5. Edge trimmer
We use it to cut dished end uneven edge.
6. Finally ,dished end is finished
Factory name: Wuxi Dongyang Spinning Equipment Co.,Ltd