1). This machine belongs to second generation of hydraulic shear,
with advanced integrated hydraulic system with an excellent
reliability and easy for maintenance.
2). Welded steel plate construction, hydraulic drive and welded
blades frame, with high strength and good rigidity.
3). Adopts three-point roller guides. Through the force to the
front roller by the special spring, the cutting beam keeps in touch
tightly with the two back rollers.
4). The shearing angle can be changed so the performance would be
good to cut either thick or thin plate.
5). As the cutting beam has been designed in inner-inclined
structure, it is easy for plates to fall down and the accuracy of
products can also be guaranteed.
6). The power storage device returns steadily and quickly.
7). The special worktable structure, designed from optimization
technology makes the deformation(Sx), which is formed during
shearing, to be able to compensate the curving of the upper beam
under the shearing force. This assures the blade gap to remain
constant laong the full length of the worktable thus enhancing the
shearing precision and quality.
|1||Type||NC Hydraulic Guillotines type|
|2||Cutting length||8000 mm|
|3||Cutting thickness||13 mm (mild steel at 450 Mpa)|
|5||Number of stroke per minute||6|
|6||Stroke back gauge||20-1000mm|
|8||NC control system|
Type: E200, control 1 Axis back gauge system, as the attached
The back gauge is with ball screw.
|9||Main Electric Elements in cabinet||Schneider|
|10||Seal in the cylinders||NOK, made in Japan|
|11||Hydraulic VALVE||HOERBIGER ,Germany|
|12||Hydraulic Pump||NACHI, Japan|
|13||Gross weight||62,800 kg|
|14||Before packing size (mm)||9255x3050x3545|
|15||Packing:||The machine should be disassemble during transportation. Our
engineer should go to customer to assemble and adjust it.|
MANUFACTURER: WUXI JINQIU MACHINERY CO.,LTD